弊公司的Cocoon Mothball System 是Cocoon Shelter中设置了除湿机,温度设定为40度,在此空间保管的备件可以防止腐蚀的进化,可以达到20年以上长时间的保管,设备,显示屏等系统包括定期的技术
支持。

 
 
Relative Humidity Control of Ship's Spares Long Term Storage
Our Cocoon Mothball System consists of Desiccant Dehumidifier
and Cocoon Shelter. The system is available in two ( 2 ) types
of Humidity Controlled Shelter - Indoor Installation Type ( or Warehouse Modification Type ) and Outdoor Standing Alone Type ( Membrane Building Type ).

A humidity controlled space environment is provided by the Desiccant Dehumidifier ( Electiricity: 3 Phase, 460 Volts 60 Hz @18.6 Amp. ) equipped with its Sensor and Data Logger, from which the remote reading of the humidity in the distant shelter is possible through ethernet connection. A periodical check up of the system will be conducted by the manufacturer's technical service unit.

A humidistat can be set to provide a cocoon shelter with the required and stable relative humidity on a long term. For storing ship's spares, it is set in the range that the relative humidity can be kept below 40.0 per cent to prevent machinery and spares from developing the moisture induced corrosion.
 
Desiccant Dehumidifier 
Manufacturer: Munters AB ( Stockholm, Kista Sweden ) 
Desiccant Dehumidifier System
The Desiccant Dehumidifier is based on Munters unique Honeycombe sorption drying wheel. Process air passes through the drying wheel and leaves the dehumidifier as dry air. Heated reactivation air collects the moisture absorbed by the drying wheel and leaves the dehumidifier as wet air.
 
 
Indoor Installation Type ( or Warehouse Modification Type ) requires a complete damp sealing application all over the interior surfaces of sheltering partition ( floor, walls and faux ceiling ). Application of damp sealing on a concrete floor will cristerlize its surface to prevent the moisture coming up from the underground.
   
  Our Singapore warehouse modified for an exclusive use as a Cocoon Shelter
 
 
  Frontal View of Humidity Controlled Shelter   Inside of Humidity Controlled Shelter
 
 
  Fire Detector & Security Sensor   Preparation Work before Damp Sealing
 
Outdoor Standing Alone Type ( or Membrane Building Type ) requires reinforced concrete floor with moisture proof layer. It is TFB ( Tension Fabric Building ), which is capable of withstanding 20 psf snow load and 100 mph 3 second gust wind.
   
  Membrane building built in coorporation with Cocoon Inc., NH U.S.A. as a Cocoon Shelter
 
 
  Frontal View of Cocoon Shelter 
 
  Inside of Cocoon Shelter ( with Storage of Reduction Gear, Gas Compressor, Turbo Charger, Cargo Pump,Tail Shaft, etc.
 
 
  Inside of Cocoon Shelter ( Empty Condition )  
 
  Ground Work for Reinforced Concrete Base
with Humidity Proof Application